Customer Requirements Document
Click here to download our Project Requirements Form, provide the information requested (see below), and eMail the completed document to your contact at ALIO.
Project Description
Project Name:
Company:
Location:
List of Contacts:
ALIO Contact:
Proposal Time Frame:
Project Time Frame:
Budget Constraints:
Volume Requirements for the next 12 months:
Submitted by:
Application description including motion profile
Description:
Number of Axes Needed:
Hexapod (yes/no):
Axis Travel (mm):
Orientation of Axes (Submit sketches or pictures to compliment the description):
Payload (The mass applied to the kinematic motion of the device (lbf or kg)):
Force (lbf or N) The action of one body on another body which tends to change the state of motion of that body. Typically described in terms of magnitude, direction, and point of application:
Fastest Motion Profile
Velocity (mm/sec):
The rate at which the motion device moves to a new position.
Constant Velocity:
The change in velocity rate at which the motion device moves (%)
Move Time Requirement:
Time for desired move (sec, micro-sec, milliseconds, please define.
Acceleration (mm/sec^2):
The change in velocity as a function of time, going from a lower speed to a higher speed.
Settling Time(msec):
Time for stage to settle once position has been reached.
Profile Description:
Detailed description of motion profile including acceleration and deceleration requirements.
Slowest Motion Profile
Velocity (microns/sec):
The rate at which the motion device moves to a new position. (um/sec)
Constant Velocity:
The change in velocity rate at which the motion device moves (%).
Move Time Requirement:
Time for desired move (sec, micro-sec, milliseconds, please define).
Acceleration (mm/sec^2):
The change in velocity as a function of time, going from a lower speed to a higher speed.
Step Size (mm, um or nm):
Smallest incremental step size required. Define units.
Profile Description:
Detailed description of motion profile including acceleration and deceleration requirements.
Stage Encoder Resolution:
The smallest positioning increment achievable with the drive. Encoder resolution is the designed position feedback performance. It is the smallest specifiable positioning increment. (nanometer)
Repeatability:
The ability of a positioning system to return to an exact location during operation with the same loads and speed. (nanometer)
Accuracy:
A move referenced from a fixed absolute zero position defining the difference between expected and actual position. (nanometer)
Duty Cycle:
Total cycle time, Move distance per cycle, cycles per hour
Environment:
Temperature Range:
Define the temperature range the motion system will be operating in.
Humidity Range:
Define if humidity control applies.
Vibration Isolation:
Describe if applicable.
Mounting Surface:
Granite, Lab Table, etc
Conditions:
Wash Down, Medical, Vacuum, Clean Room, Corrosive, Manufacturing
Vacuum Level:
Vacuum Bake Out Temp:
Vacuum Running Temp:
Operating Vacuum Temperature Range.
Motion Controller:
ALIO Industrial PC Controller, ACS Motion Control, Delta Tau, other
Custom GUI/Application Software (please define):
Details Not Covered:
Click here to download our Product Requirements Document, provide the information requested, and eMail the completed document to your contact at ALIO.
|
